Charnwood VIPERIC | Chuck Exert | Thread Adaptor

  • £20.00 GBP


Headstock thread adaptor.

To fit onto a lathe with M33 x 3.5mm headstock thread.

Suitable to mount a Scroll Chuck or Faceplate with a 1" x 8tpi thread.

The thread adaptor has spanner flats to  aid tightening or removal.

This thread adapter has 2 locking screws for securing the adaptor onto the lathe. Centre located 7mm from the end.   

Includes 10mm diameter blind hole for tightening or removing using a suitable knock out bar.