W711 8'' Woodworking Bandsaw | Charnwood Machinery

  • £219.99 GBP
  • Save £9.01 GBP


Home workshop bench top woodworking bandsaw, light enough to move off the bench after use.

  • Precision Ground Cast Iron Table
  • Quick Lock Fence
  • Quiet Induction Motor
  • Crosscutting Mitre Guide Included
  • 3'' Cutting Depth
  • 8" Cutting Width (Throat)
  • Supplied with a High Quality Blade

A compact sized yet accurate cutting woodworking bandsaw with a durable precision ground cast iron tilting table, including a T-slot mitre fence channel. The quick release fence locks onto both front and rear of the table to provide a straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting at any angle. The blade guard can be adjusted using just one hand with the hand wheel located at the rear of the machine. A great feature on this small bandsaw is the easy access to the blade guides and rear thrust bearing which controls the bandsaw blade during the cut and keeps it cutting in a straight line. A durable powder coated paint finish will keep it looking good in your workshop for many years.

Our W711 woodworking bandsaw is supplied with rip fence, sliding crosscut mitre fence adjustable 60 degrees each way, 1/4" British made blade, NVR switch, 40mm diameter extraction outlet, 1.7m power cable and UK 3 pin plug. Use 100/35RC to convert the dust outlet to 100mm diameter.

This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.

Specification

 Maximum cutting depth  80mm (3'')
 Throat width  200mm (8'')
Max. cutting width with fence 95mm Left / 95mm Right
 Table size  300mm x 270mm
 Table tilt  0-45
Mitre Guide T-Slot 9mm / 14mm
 Cutting speed 800m/min
 Motor (induction)  300w (0.4hp)
 Blade length  1400mm
 Blade widths  6-10mm (1/4"-3/8")
Assembly Time Required 20 Minutes
 Dimensions (WxDxH)  440mm x 400mm x 700mm
 Weight  25kg
 Rating Hobby
 Warranty 1 Year

The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. It is possible to use this bandsaw for cutting metal but only with the correct blade fitted. (not supplied)