"The difference between these moulds and others really is Black and White."
Milled from solid HDPE blocks means no seams or joints that can leak, they are hard-wearing and will not deteriorate from multiple uses with resin.
Each cavity is a 20x19x150mm with a slight taper to the sides meaning they are slightly less at the bottom of mould cavity.
The Quad now comes with a set of 4 large and 4 small bungs to allow for tube in casting. These bungs will allow for a range of kits from slimline up to most 2 part cap tubes (max 14mm). With 4 cavities this means you can cast for 2 complete 2 part kits or 4 single barrel kits. If you wish the possibility of pen blanks and tube in casts in the same mould. Because of the length of cavity in the SoliMould even razor handles and long tube pen kits are easily accommodated.
These come with silicon bungs fitted to the bottom to allow demoulding using an air blower, or alternatively a light tap with a punch through the hole. We use a dead blow hammer on the back of our moulds to release blanks and this works very well.
It is advised that a release agent is used with this product to ease in de-moulding procedure
This page contains assembly instructions for the pen kits we supply. If you can not find the instructions you are looking for please email me at email@example.com and I will do everything I can to help you.